I understand from the Sys/Bios download page that ver. 6.83 supports CCSv10.1.0 or higher. Our customer would like to know how to create a Sys/Bios project in CCS ver. 12. Are the training videos in ...

I am referring to the TIDA-010242 reference design for my 28V system. My system requires 500W. As I understand from the disturbance limits information, the minimum voltage is 12V (1s). You are correct ...

Since the 10.1 SDK is due within 2 months, and there are some notable bugs in 10.0, should we wait for a version 10.1 Linux Academy?

I have written a javascript for adding breakpoint and reading a variable value, using DSS API. As of now I am running that script from scripting console of CCS using loadJSFile command. As I run the ...

I am facing an issue with balancing feature. I am trying to test external cell balancing via AFE through 0x0083 CB_ACTIVE_CELLS() command. It works in one hardware variant and not in other. What could ...

To troubleshoot, I tried loading it from U-Boot. When using signed remote core firmware, the authentication verification passed successfully. However, when using ...

I have built an 8-to-1 inverting summing amplifier using OPA820 where, R_f = R = 1K (unity gain). However, I can see a reduction in pulse fall-time which I don't understand. Does anyone who the reason ...

What I want to do: I want to set the AFE4490 datasheet Figure 116. LEDCNTRL: LED Control Register (Address = 22h, Reset Value = 0000h) and control it so that only the TXP TXN LED blinks. (The signal ...

I am facing following problems while installing the MacOS installer of MCU-PLUS-SDK. It says the .dmg file is damaged and it cannot be installed. Could you please check this.

If the device is disabled, but a voltage is present at the VOUT, what is the expected leakage at the VOUT pin (preferrably over PVT)? Bias voltage is 5.3V.

I use FDC2212, I try to measure two capacitance which are CU plane on a PCB. But capacitor interact each other. There is two shielding concept releated on datasheet. But I can not undestand How I use ...

I define the function, which calls the library functions, to be stored before start in the FLASH and copy during start of the program to RAM. *the function itself is copied to the RAM and the PC goes ...