All of that isn't to say that Raspberry Pis are bad, or that you should never use them. On the contrary, if you have one ...

Getting the hang of through-hole soldering is tricky for those of us tinkering at home with our irons, spools, flux, and, sometimes, braids. It’s almost reassuring, then, to learn that through-hole ...

Raspberry Pi owners looking to use higher voltages with their mini PC, might be interested in this new opto-isolator board called the Opto-pi which has been specifically designed to be used with the ...

How much can you cram into a 2.6 in x 1.2 in circuit board? You'd presume not much, but the Raspberry Foundation is trying to prove you wrong. First, it added built-in Wi-Fi to its teeny Raspberry Pi ...

One of the biggest and earliest issues I ran into using Raspberry Pis for self-hosting is the lack of support for Arm processors. Despite the rise in popularity of Arm in recent years, a large number ...

A few days ago we reported on a new product for owners of the Raspberry Pi Zero, a set of solderless header pins that had a novel installation method involving a hammer. We were skeptical that they ...

[Thomas] wanted to play around with a few high-power LEDs and a RaspberryPi. LED controllers usually require some form of PWM to change the brightness of a LED, and unfortunately the Pi only has one ...

If you do, then you're in luck, thanks to the Suptronics X1013 expansion board for the Raspberry Pi 5, which adds ten USB ...

A Raspberry Pi can be found centric to 3D printers and other CNC machines—almost since the sale of the first Raspberry Pi. Wired had an article about it back in 2013! But can a Pi cut it as a CNC ...